Media Size - SATO M-8485Se Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Maximum
Default bbbb
Expanded
SATO "Se" Print Engines

Media Size

<ESC>A1aaaabbbb
aaaa = Label Width in dots (0 to Hmax)
bbbb = Label Length in dots (0 to Vmax)
Example: <ESC>A108323200
Placement: Separate data stream to the printer.
Default: <ESC>A108322136
To set the size of the media.
A108321424
There is no printer output resulting from this command. It is used to
automatically adjust the offset values for the size of label being used.
The sample command stream specifies a label 832 dots wide by 1424
dots long.
1. The Base Reference point is always the on the right (looking at
the front of the printer) side of the print head. This command
adjusts the Base Reference Point to correspond with the right
edge of the loaded media.
2. If the label size is changed, then this command must be
respecified to center the print image on the label.
3. All eight variables ("aaaa" and "bbbb") must be included in this
command.
M-8459Se
Hmax
aaaa 896
Vmax
1424
bbbb 9999
PN 9001073 Rev C
Section 5. Programming Reference
M-8460Se M-8485eS
1216 1024
1424 1424
9999 9999
M-8490Se
1344
2136
9999
Page 5-53