SATO M-8485Se Operator And Technical Reference Manual page 47

COPY START
YES
MEMORY->CARDCOPY
COPYING
MEMORY->CARDCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
CARD->MEMORYCOPY
PROGRAM
COPY START
YES
CARD->MEMORY
COPY COPYING
CARD->MEMORYCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
MEMORY->CARDCOPY
PROGRAM
COPY START
YES
MEMORY->CARDCOPY
COMPLETED
SATO "Se" Print Engines
2. Confirm your selection by stepping the cursor to the Yes
selection. If you select No, the display will return to the
NO
previous selection.
3. Press the FEED key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the FEED key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error
This selection allows the user to copy printer firmware from
the PCMCIA Memory Card to the printer.
Y/N
1. Use the LINE key to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode.
If No is selected, the display will advance to the mode
display.
2. Confirm your selection by stepping the cursor to the Yes
selection. If you select No, the display will return to the
NO
previous selection.
3. Press the FEED key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the FEED key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error
This selection allows the user to copy the current firmware
installed in the printer to a PCMCIA Memory Card.
Y/N
1. Use the LINE key to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode.
If No is selected, the display will advance to the mode
display.
2. Press the FEED key to accept the selection. If Yes was
selected the copy process will start. If you select No, the
NO
display will return to the previous selection.
3. Once the copy process is completed, press the FEED key
to step the display.
9001073 Rev C
Section 3. Configuration
Indicates a Read/Write error occured
Indicates no card was recognized
Indicates that there is insufficient
memory available.
Indicates a Read/Write error occured
Indicates no card was recognized
Indicates that there is insufficient
memory available.
Page 3-17