SATO M-8485Se Operator And Technical Reference Manual page 221

INSTRUCTION DESCRIPTION
WDHaaaaVbbbb Copy Image Area. To copy an image to another location of the label.
XccccYdddd aaaa =
bbbb =
cccc =
dddd =
WKnn...n Job Name. Stores the job name.
nn..n =
WLa Font type. Specifies the 28W x 52L dot matrix font (including
decenders).
a
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
XWa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a
Z Stop Code. Ends all print jobs.
%a Rotate. Fixed Base Reference Point. Rotates printing in 90°
increments without changing the base reference point.
a
$a,b,c,d Vector font. Specifies printing of the unique SATO vector font.
a
b
c
d
Page A-7
Horizontal position of the top left corner of image area
Vertical position of the top left corner of image area
Horizontal length of image area
Vertical length of image area
Job name, up to 16 ASCII characters
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater
than 3
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater
than 3
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater
than 3
= 0 Sets print to normal direction
1 Sets print to 90° CCW
2 Sets print to 180° rotated (upside down)
3 Sets print to 270° CCW (90° CW)
= A Helvetica Bold (proportional spacing)
B Helvetica Bold (fixed spacing)
= Font width (50-999 dots*)
= Font height (50-999 dots*)
= Font variation (0-9) as follows:
0 Standard
1 Standard open (outlined)
2 Gray (mesh) pattern 1
3 Gray (mesh) pattern 2
4 Gray (mesh) pattern 3
5 Standard, shadow 1
6 Standard, shadow 2
7 Standard mirror image
8 Italic
9 Italic open (outlined)
PN 9001073 Rev C
Appendix A: Command Quick Reference
PAGE
5-31
5-48
5-38
5-33
5-33
5-33
5-38
5-38
5-74
5-70
5-36
SATO "Se" Print Engines