SATO M-8485Se Operator And Technical Reference Manual page 222

Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION
$=(data) Data for Vector font.
#Ea Print Darkness. Specifies a new print darkness setting. The lightest
setting is "1". There are three darkenss levels (five for the M-8459Se)
that can be specified.
a = Print
Darkness
(aaaa,bbbb Reverse Image. Reverse image from black to white and vice versa.
Units of measure are dots.
aaaa = Hor
Length
bbbb = Vert
Length
&
Store Form Overlay. Stores a specified label image in the printer's
volatile form overlay memory.
/
Recall Form Overlay. Recalls the label image from the printer's
formoverlay memory for printing.
0 (zero) Replace Data (Partial Edit). Provides the ability to replace a specified
area of the previous label with new data.
*a Clear Print Job(s) and Memory. Clears individual memory and
buffers.
a
a
@,nnnn Off-Line. Signals the printer to go off-line after the completion of a print
job.
nnnn =
2D3m,a,bb,c QR Code. Prints QR Code symbols. See command description for
d,ee,ff,gg parameter definition and usage.
SATO "Se" Print Engines
M-8459Se
1, 2, 3, 4, or
5
M-8459S
0001 to
0896
Expanded
= When not included in command, clears print jobs in
Multi-Buffer mode.
= If included in command, specifies memory section to be
cleared
T Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
Optional message to be displayed on the LCD panel.
Maximum of 32 characters.
PN 9001073 Rev C
M-8460Se M-8485Se
1, 2 or 3 1, 2 or 3
M-8460S M-8485S
0001 to 0001 to
1216 1024
0001 to 1424
0001 to 9999
PAGE
5-36
5-58
M-8490Se
1, 2 or 3
5-68
M-8490S
0001 to
1344
0001 to
2136
0001 to
9999
5-42
5-41
5-66
5-29
5-56
5-110
Page A-8