Running The Installation; Installing The Printer Driver When Connected Via Usb Or; Ieee1284 - SATO CL4NX Manual

1.4 Running the Installation

The printer driver installation procedure differs depending on how the computer and
printer are connected.
Check how the printer is connected before running the installation.
1.4.1 Installing the Printer Driver When Connected via USB or IEEE1284
This section describes how the printer driver is installed automatically with the Plug and
Play feature.
Note:
• Automatic printer detection is supported only on a USB port and IEEE1284 port.
• Before starting the installation, close all applications.
• When you perform the printer driver setup, the properties settings, or the print settings, log in
with Administrator Privileges.
• When you use the printer driver, enable bi-directional communication.
• When using multiple printers, it is necessary to install as many printer drivers as printers, to
identify each printer.
• After installing the printer driver for the first printer, the printer driver for the second and
additional printers will be automatically installed when the printers are connected to the
computer and powered on. However, the names of the printer drivers will be "printer driver
name (1)," "printer driver name (2)" etc. To change the printer driver name, right-click the
printer driver in [Devices and Printers], select [Printer properties], and change the name at the
top of the [General] tab.
1. Power on the printer.
2. Connect the printer to a computer, using a USB cable or IEEE1284 cable.
The printer driver is located online and downloaded to the computer. Automatic
installation starts immediately.
15