Calling Up Setup Files (Load Setup File) - Roland RD-700GX Owner's Manual

Value
The data will be stored in the RD-700GX's
INT
internal memory.
The data will be stored on USB memory
USB connected to the USB MEMORY connector on
the rear panel.
5.
Press the Cursor [
cursor to the positions where the characters
are to be input.
6.
Use the [DEC] [INC] buttons or the VALUE dial
to enter the name.
Names can consist of up to 16 characters.
The following characters are available.
space ! # $ % & ' ( ) + , - . 0–9 ; = @ A–Z [ ] ^ _ ` a–z {
} ~
When the [F2] button is pressed, a single-character
blank space is inserted; pressing the [F1] button deletes
one character.
You can't save a setup file with a name that starts
with a ". (period)". Do not use a ". (period)" at the
beginning of the name.
7.
Repeat steps 5–6 to input the name.
8.
When you've finished entering the file name,
press the [ENTER] button.
The Setup file will be saved.
"Executing..." appears in the display while the save
NOTE
is in progress. Be sure never to turn off the power.
If a file with the same name has already been
saved, the confirmation message "Overwrite OK?"
appears. To overwrite the Setup file, press the
[ENTER] button; to save the file under a different
name, press the [EXIT/SHIFT] button.
9.
Press the [EDIT] button, extinguishing its
indicator.
You are returned to the Tone screen.
Description
] [ ] buttons to move the
Detailed Settings for Each Function ([EDIT] Button)
Calling Up Setup Files
(Load SETUP File)
Here's how to load a previously saved Setup file.
The current settings are erased when a Setup file is
called up. Be sure to save you would like to keep
NOTE
first before calling up (p. 120).
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2.
Press the Cursor [
"5.File," then press the [ENTER] button.
The Edit screen appears.
3.
Press the Cursor [
"1. Load SETUP File," then press the [ENTER]
button.
The following screen appears.
fig.05-16-2g
4.
Press the [F1 (MEDIA)] button to select the
memory into which you want to load the data.
] [ ] buttons to select
] [ ] buttons to select
121