Roland RD-700GX Owner's Manual page 172

Effect/Parameter List
72: ENH→CHORUS
(ENHANCER→CHORUS)
This effect connects an enhancer and a chorus in series.
MFX Control Chorus Bal, Chorus Depth, Cho Rate, Enhancer Sens
Parameter Value
Enhancer Sens 0–127
Enhancer Mix 0–127
Chorus PreDly 0.0–100.0 ms
Rate Mode Hz, note
Cho Rate(Hz) 0.05–10.00 Hz
Cho Rate ( ) note (*1)
Chorus Depth 0–127
D100:0W–
Chorus Bal
D0:100W
Level 0–127
73: ENH→FLANGER
(ENHANCER→FLANGER)
This effect connects an enhancer and a flanger in series.
Flngr Bal, Fln Rate, Flngr Depth, Flngr Feedback, Enhancer
MFX Control
Sens
Parameter Value
Enhancer Sens 0–127
Enhancer Mix 0–127
Flngr PreDly 0.0–100.0 ms
Flngr Mode Hz, note
Fln Rate(Hz) 0.05–10.00 Hz
Fln Rate( ) note (*1)
Flngr Depth 0–127
Flngr Feedback -98– +98%
D100:0W–
Flngr Bal
D0:100W
Level 0–127
74: ENH→DELAY (ENHANCER→DELAY)
This effect connects an enhancer and a delay in series.
MFX Control Delay Bal, Enhancer Sens
Parameter Value
Enhancer Sens 0–127
Enhancer Mix 0–127
Delay Mode ms, note
172
Assignable Parameters
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from the direct
sound until the chorus sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Assignable Parameters
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
Assignable Parameters
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
When this is set to "note," the effect is
synchronized with the tempo.
Parameter Value
Delay (ms) 1–2600 ms
Delay ( ) note (*1)
Delay Feedback -98– +98%
200–8000 Hz,
Delay HF Damp
BYPASS
D100:0W–
Delay Bal
D0:100W
Level 0–127
75: CHO→DELAY (CHORUS→DELAY)
This effect connects a chorus and a delay in series.
MFX Control Delay Bal, Chorus Bal, Chorus Depth, Cho Rate
Parameter Value
Chorus PreDly 0.0–100.0 ms
Rate Mode Hz, note
Cho Rate(Hz) 0.05–10.00 Hz
Cho Rate ( ) note (*1)
Chorus Depth 0–127
D100:0W–
Chorus Bal
D0:100W
Delay Mode ms, note
Delay (ms) 1–2600 ms
Delay ( ) note (*1)
Delay Feedback -98– +98%
200–8000 Hz,
Delay HF Damp
BYPASS
D100:0W–
Delay Bal
D0:100W
Level 0–127
76: FLN→DELAY (FLANGER→DELAY)
This effect connects a flanger and a delay in series.
MFX Control Delay Bal, Flngr Bal, Fln Rate, Flngr Feedback
Parameter Value
Flngr PreDly 0.0–100.0 ms
Description
Adjusts the delay time from the direct
sound until the delay sound is heard.
(Hz)
Adjusts the delay time from the direct
sound until the delay sound is heard.
(note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
BYPASS.
Adjusts the volume balance between
the sound that is sent through the delay
(W) and the sound that is not sent
through the delay (D).
Output Level
Assignable Parameters
Description
Adjusts the delay time from the direct
sound until the chorus sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Volume balance between the direct
sound (D) and the chorus sound (W)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the direct
sound until the delay sound is heard.
(Hz)
Adjusts the delay time from the direct
sound until the delay sound is heard.
(note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
BYPASS.
Adjusts the volume balance between
the sound that is sent through the delay
(W) and the sound that is not sent
through the delay (D).
Output Level
Assignable Parameters
Description
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.