Sorting The Files Displayed In The File List; Loading A Project From Disk Into The V-Synth (Load Project) - Roland V-Synth Owner's Manual

Disk-Related Functions (Disk Mode)
Sorting the Files Displayed in the
File List
In each Disk Utility screen, you can change the order of the files
displayed in the file list.
1. In the upper right of the disk utility screen, touch < >.
A pulldown menu like the following appears.
fig.06-03_50
2. Choose the desired sorting order from the pull-down menu.
<Sort By Name >: Sort in alphabetical order of file name.
>: Sort in reverse alphabetical order of file
<Sort By Name
name.
<Sort By Size >: Sort in ascending order of file size.
: Sort in descending order of file size.
<Sort By Size
84
Loading a Project from Disk
into the V-Synth (Load Project)
This function loads a project on disk into the V-Synth's work area.
When a project is loaded, work area will be rewritten. If work
area contains important data, you must save it to disk before you
load other data.
1. Access the DISK UTILITY MENU screen (p. 83).
2. Touch <Load Project>.
The Disk Load Project screen appears.
fig.06-04_50
3. To load from internal memory, touch <Int>. To load from a
PC card, touch <Card>. Then select the project that you want
to load.
4. Touch <OK>.
A WARNING window like the following appears.
fig.06-05_50
If you want to cancel the procedure at this point, touch
<CANCEL>.
5. Touch <EXECUTE> to execute the operation.