Roland RD-700GX Owner's Manual page 68

Using the Convenient Functions in Performances
6.
Select the save-destination Setup number, either by using the [DEC] [INC] buttons or the
VALUE dial.
When using the TONE SELECT buttons to input Setup numbers, press the [ENTER] button
afterwards to set the number.
fig.Q2-22g
7.
When you have finished determining the save destination and the name for the new
Setup, press the [ENTER] button or the [F1 (WRITE)] button.
The [ENTER] button's indicator is flashing, and the confirmation message appears.
fig.Q2-23g
If you do not want to save the Setup, press the [EXIT/SHIFT] button or [SETUP WRITE] button.
8.
When the [ENTER] button is pressed, saving of the Setup begins.
When you have finished saving the Setup, the [SETUP WRITE] button's indicator goes out and
you are returned to the Tone screen.
NOTE
Settings Not Saved in a Setup
The following settings cannot be saved to a Setup.
• Song Number
• Audio Key Settings (p. 70)
• System Settings (p. 106)
• V-LINK Settings (p. 133)
• Song Function (p. 135)
• Rec Setting (p. 138)
Pressing the [F1 (WRITE)] button in the Edit screen saves the System, and V-LINK settings.
68
Never switch off the power while "Executing..." appears in the display.