Roland RD-700GX Owner's Manual page 173

Parameter Value
Flngr Mode Hz, note
Fln Rate(Hz) 0.05–10.00 Hz
Fln Rate( ) note (*1)
Flngr Depth 0–127
Flngr Feedback -98– +98%
D100:0W–
Flngr Bal
D0:100W
Delay Mode ms, note
Delay (ms) 1–2600 ms
Delay ( ) note (*1)
Delay Feedback -98– +98%
200–8000 Hz,
Delay HF Damp
BYPASS
D100:0W–
Delay Bal
D0:100W
Level 0–127
77: CHO→FLANGER
(CHORUS→FLANGER)
This effect connects a chorus and a flanger in series.
Chorus Bal, Flngr Bal, Chorus Depth, Cho Rate, Fln Rate,
MFX Control
Flngr Feedback
Parameter Value
Chorus PreDly 0.0–100.0 ms
Rate Mode Hz, note
Cho Rate(Hz) 0.05–10.00 Hz
Cho Rate ( ) note (*1)
Chorus Depth 0–127
D100:0W–
Chorus Bal
D0:100W
Flngr PreDly 0.0–100.0 ms
Flngr Mode Hz, note
Fln Rate(Hz) 0.05-10.00 Hz
Fln Rate( ) note (*1)
Flngr Depth 0-127
Flngr Feedback -98– +98%
Description
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Volume balance between the direct
sound (D) and the flanger sound (W)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the direct
sound until the delay sound is heard.
(Hz)
Adjusts the delay time from the direct
sound until the delay sound is heard.
(note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
BYPASS.
Adjusts the volume balance between
the sound that is sent through the delay
(W) and the sound that is not sent
through the delay (D).
Output Level
Assignable Parameters
Description
Adjusts the delay time from the direct
sound until the chorus sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Modulation frequency of the chorus
effect (Hz)
Modulation frequency of the chorus
effect (note)
Modulation depth of the chorus effect
Volume balance between the direct
sound (D) and the chorus sound (W)
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Modulation frequency of the flanger
effect (Hz)
Modulation frequency of the flanger
effect (note)
Modulation depth of the flanger effect
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Parameter Value
D100:0W–
Flngr Bal
D0:100W
Level 0–127
78: SYM.RESONCE
(SYMPATHETIC RESONANCE)
On an acoustic piano, holding down the damper pedal allows
other strings to resonate in sympathy with the notes you play,
creating rich and spacious resonances. This effect simulates
these sympathetic resonances.
* This effect is used only for MFX1.
MFX Control Depth, Damper, P-Sft Amount, P-Sft Level
Parameter Value
Depth 0–127
Damper 0–127
16–15000 Hz,
Pre LPF
BYPASS
BYPASS, 16–
Pre HPF
15000 Hz
Peaking Freq 200–8000 Hz
Peaking Gain -15– +15 dB
0.5, 1.0, 2.0,
Peaking Q
4.0, 8.0
16–15000 Hz,
HF Damp
BYPASS
BYPASS,
LF Damp Freq
16–15000 Hz
Lid 1–7
Level 0–127
P-Sft Amount 0–127
P-Sft Level 0–127
16–15000 Hz,
P-Sft LPF
BYPASS
BYPASS,
P-Sft HPF
16–15000 Hz
P-Sft to Rev 0–127
Damper offset 0–64
Effect/Parameter List
Description
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
Assignable Parameters
Description
Depth of the effect
Depth to which the damper pedal is
pressed (controls the resonant sound)
Frequency of the filter that cuts the
high-frequency content of the input
sound (BYPASS: no cut)
Frequency of the filter that cuts the low-
frequency content of the input sound
(BYPASS: no cut)
Frequency of the filter that boosts/cuts
a specific frequency region of the
input sound
Amount of boost/cut produced by the
filter at the specified frequency region
of the input sound
Width of the frequency region
boosted/cut by the `Peaking Gain'
parameter (larger values make the
region narrower)
Frequency at which the high-frequency
content of the resonant sound will be
cut (BYPASS: no cut)
Frequency at which the low-frequency
content of the resonant sound will be
cut (BYPASS: no cut)
Adjusts the extent to which the lid of
the grand piano is open.
Output Level
Amount of resonance
Volume level of the resonant
component
Basic frequency at which the filter cuts
the high-frequency portion of the
resonant component (BYPASS: no cut)
Basic frequency at which the filter cuts
the low-frequency portion of the
resonant component (BYPASS: no cut)
Volume of additional resonance
added to resonant component
Volume of additional slight resonance
when the damper pedal is not pressed
173