Adding Reverberation To The Sound ([Reverb] Button) - Roland RD-700GX Owner's Manual

Performance

Adding Reverberation to the Sound ([REVERB] Button)

The RD-700GX can apply a reverb effect to the notes you play on the keyboard.
Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if
you were playing in a concert hall.
fig.Q1-24rev
1.
Press the [REVERB] button.
The reverb type switches each time you press the [REVERB] button.
OFF (unlit)
ROOM
HALL
CATHEDRAL
2.
Adjust the REVERB [DEPTH] knob to adjust the amount of reverb effect to be applied.
Rotating the knob clockwise applies a deeper reverb, and rotating it counterclockwise applies less
reverb.
NOTE
48
TYPE
No reverb is used.
Simulates the reverberation of a room.
Simulates the reverberation of a large concert hall.
Simulates the reverberation of a cathedral.
Types of reverb other than those listed above can be selected in "Reverb Type" (p.
118) of the "3. Effects" Edit screen. In this case, the [REVERB] button's indicator
corresponding to the selected type flashes.
When the TONE INFO's "Reverb Amount" setting is set to "0," then no effect is
applied, even when the REVERB [DEPTH] knob is turned (p. 89).
Explanation