Assigning Functions To The [S1] [S2] Buttons (S1/S2 Assign); Changing The Multi-Effect 1 [Control] Knob; Multi-Effect 2 [Control] Knob Settings (Control 1/2 Knob Assign); Assigning Functions To The Zone Level Sliders (Slider Assign) - Roland RD-700GX Owner's Manual

Detailed Settings for Each Function ([EDIT] Button)
Assigning Functions to the [S1] [S2]
Buttons (S1/S2 Assign)
This setting determines the function of the [S1] and [S2]
buttons.
Parameter Value
00: OFF
01:
COUPLE +1OCT
02:
COUPLE -1OCT
03:
COUPLE +2OCT
04:
COUPLE -2OCT
05:
COUPLE +5TH
S1/S2
06:
COUPLE -4TH
07:
OCTAVE UP
08:
OCTAVE
DOWN
09:
START/STOP
10:
TAP TEMPO
11:
SNG PLY/STP
116
Function/
Parameter Setting Changed
No control
Playing a key will also sound
an additional note one
octave higher.
Playing a key will also sound
an additional note one
octave lower.
Playing a key will also sound
an additional note two
octave higher.
Playing a key will also sound
an additional note two
octave lower.
Playing a key will also sound
an additional note a fifth (7
semitones) higher.
Playing a key will also sound
an additional note a fourth
(5 semitones) lower.
Each time you press the
button, the keyboard range
will rise by an octave
(maximum 4 octaves).
Each time you press the
button, the keyboard range
will lower by an octave
(maximum 4 octaves).
The external sequencer will
start/stop.
The tempo will be modified
to the interval at which you
press the button.
Starts and stops the song (p.
58).
Changing the MULTI-EFFECT 1
[CONTROL] Knob/MULTI-EFFECT 2
[CONTROL] Knob Settings
(Control 1/2 Knob Assign)
Normally, MULTI-EFECTS 1 [CONTROL] knob and MULTI-
EFECTS 2 [CONTROL] knob are used for making settings that
adjust the multi-effects (MFX1/2 CTRL), but they can also be
used for settings that change the way tones are played or the
tempo.
Parameter Value
00: OFF
Ctrl 1 Knob
MFX 1
(Control 1
CTRL
Knob Assign)
TEMPO
OFF
Ctrl 2 Knob
MFX 2
(Control 2
CTRL
Knob Assign)
TEMPO
Assigning Functions to the ZONE
LEVEL Sliders (Slider Assign)
Here you can assign the function that the ZONE LEVEL sliders
will perform when the CONTROL indicator is lit.
Parameter Value
00: OFF
CC01–CC31,
CC33–CC95
UP1/UP2/
96:
LW1/LW2
BEND UP
(Slider
Assign)
97:
BEND DOWN
98:
AFTERTOUCH
Changing the Harmonic Bar Settings
(Harmonic Bar)
→ "Changing the ZONE LEVEL Slider Feet Assignments
(Harmonic Bar)" (p. 64)
Description
No control
Adjusts the depth of multi-effect
1 for the current zone.
Adjusts the tempo.
No control
Adjusts the depth of multi-effect
2 for the current zone.
Adjusts the tempo.
Description
No control
Controller Numbers 1-31,
33-95
Raises the pitch in
semitone units.
Lowers the pitch in
semitone units.
Controls After Touch