Roland RD-700GX Owner's Manual page 166

Effect/Parameter List
48: 4TP PAN DLY (4TAP PAN DELAY)
This effect has four delays.
Stereo location of each delay
2
1
L
MFX Control Balance, Delay1, Delay2, Delay3, Delay4
Parameter Value
Delay1 Mode ms, note
Delay1 (ms) 1–2600 ms
Delay1 ( ) note (*1)
Delay2 Mode ms, note
Delay2 (ms) 1–2600 ms
Delay2 ( ) note (*1)
Delay3 Mode ms, note
Delay3 (ms) 1–2600 ms
Delay3 ( ) note (*1)
Delay4 Mode ms, note
Delay4 (ms) 1–2600 ms
Delay4 ( ) note (*1)
Delay1
-98– +98%
Feedback
200–8000 Hz,
HF Damp
BYPASS
Delay1 Level
Delay2 Level
0–127
Delay3 Level
Delay4 Level
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance
D0:100W
Level 0–127
49: MULTTAP DLY (MULTI TAP DELAY)
This effect provides four delays. Each of the Delay Time
parameters can be set to a note length based on the selected
tempo. You can also set the panning and level of each delay
sound.
MFX Control Balance, Delay1, Delay2, Delay3, Delay4
Parameter Value
Delay1 Mode ms, note
Delay1 (ms) 1–2600 ms
Delay1 ( ) note (*1)
166
3
4
R
Assignable Parameters
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay sound
is heard. (Hz)
Adjusts the time until the delay sound
is heard. (note)
Settings of the Delay 2
The parameters are the same as for
the Delay 1.
Settings of the Delay 3
The parameters are the same as for
the Delay 1.
Settings of the Delay 4
The parameters are the same as for
the Delay 1.
Adjusts the amount of the delay sound
that's fed back into the effect.
Negative
(-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you do not want to filter out any
high frequencies, set this parameter to
BYPASS.
Volume of each delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
Assignable Parameters
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay sound
is heard. (Hz)
Adjusts the time until the delay sound
is heard. (note)
Parameter Value
Delay2 Mode ms, note
Delay2 (ms) 1–2600 ms
Delay2 ( ) note (*1)
Delay3 Mode ms, note
Delay3 (ms) 1–2600 ms
Delay3 ( ) note (*1)
Delay4 Mode ms, note
Delay4 (ms) 1–2600 ms
Delay4 ( ) note (*1)
Delay1
-98– +98%
Feedback
200–8000 Hz,
HF Damp
BYPASS
Delay1 Pan L64–63R
Delay2 Pan L64–63R
Delay3 Pan L64–63R
Delay4 Pan L64–63R
Delay1 Level 0–127
Delay2 Level 0–127
Delay3 Level 0–127
Delay4 Level 0–127
Low Gain -15– +15 dB
High Gain -15– +15 dB
D100:0W–
Balance
D0:100W
Level 0–127
50: REVERSE DLY (REVERSE DELAY)
This is a reverse delay that adds a reversed and delayed
sound to the input sound. A tap delay is connected
immediately after the reverse delay.
MFX Control Balance, Rev Dly, Rev Dly Pan
Parameter Value
Threshold 0–127
Rev Dly Mode ms, note
Rev Dly (ms) 1–1300 ms
Rev Dly ( ) note (*1)
Rev Dly Fbk -98– +98%
200–8000 Hz,
Rev Dly HFDmp
BYPASS
Rev Dly Pan L64–63R
Rev Dly Level 0–127
Delay1 Mode ms, note
Delay1 (ms) 1–1300 ms
Delay1 ( ) note (*1)
Description
Settings of the Delay 2
The parameters are the same as for
the Delay 1.
Settings of the Delay 3
The parameters are the same as for
the Delay 1.
Settings of the Delay 4
The parameters are the same as for
the Delay 1.
Adjusts the amount of the delay sound
that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
the high frequencies, set this
parameter to BYPASS.
Stereo location of Delays 1
Stereo location of Delays 2
Stereo location of Delays 3
Stereo location of Delays 4
Output level of Delays 1
Output level of Delays 2
Output level of Delays 3
Output level of Delays 4
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
Assignable Parameters
Description
Volume at which the reverse delay will
begin to be applied
When this is set to "note," the effect is
synchronized with the tempo.
Delay time from when sound is input
into the reverse delay until the delay
sound is heard (Hz)
Delay time from when sound is input
into the reverse delay until the delay
sound is heard (note)
Proportion of the delay sound that is to
be returned to the input of the reverse
delay (negative values invert the
phase)
Frequency at which the high-frequency
content of the reverse-delayed sound
will be cut (BYPASS: no cut)
Panning of the reverse delay sound
Volume of the reverse delay sound
When this is set to "note," the effect is
synchronized with the tempo.
Delay time from when sound is input
into the tap delay until the delay sound
is heard (Hz)
Delay time from when sound is input
into the tap delay until the delay sound
is heard (note)