Exporting A Step Edit Pattern; (User Pattern Export); About The Exported Midi Files; Returning To The Factory Settings - Roland JUPITER-X Reference Manual

Exporting a Step Edit Pattern

(USER PATTERN EXPORT)

Here's how the step edit pattern of a scene can be exported to a USB
flash drive as MIDI data (SMF).
1 .
Connect a USB flash drive .
2 .
Press the [MENU] button .
3 .
Use the [1] knob to select
the [ENTER] button .
You can also make this selection by using the
buttons instead of the [1]
4 .
Use the [1] knob to select
and then press the [ENTER]
5 .
Use the PAGE [<] [>] buttons
use the [2] knob to change the character .
6 .
When you've specified the file name, press the
[ENTER] button .
A confirmation message appears.
If you decide to cancel, press the
7 .
To execute, use the [2] knob
press the [ENTER] button .
The scene is exported to the USB flash drive.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the "Executing..."

About the Exported MIDI Files

5
The SMF format is Format 0.
5
A separate file is exported for each part, and
following the name. The MIDI channels follow the setting of the unit
(SYSTEM>Basic Ch setting).
5
Only parts that contain user pattern data are exported.
5
Sound-related settings are not included.

Returning to the Factory Settings

(FACTORY RESET)

Here's how the settings that you edited and saved on the JUPITER-X
can be returned to their factory-set condition.
* When you execute this operation, all saved settings including the sound
parameters will be lost.
* If you will later need the current settings, be sure to use the backup
function (p. 48) to save the current settings before you restore the
factory settings.
1 .
Press the [MENU] button .
2 .
Use the [1] knob to select
the [ENTER] button .
You can also make this selection by using the
buttons instead of the [1]
3 .
Use the [1] knob to select
press the [ENTER] button .
A confirmation message appears.
If you decide to cancel, press the
4 .
To execute, use the [2] knob
press the [ENTER] button .
The display indicates "Completed. Turn off power. "
5 .
Turn the power of the JUPITER-X off and then on
again .
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the "Executing..."
"UTILITY," and then press
PAGE [ ] [ ]
knob.
"USER PATTERN EXPORT,"
button .
to move the cursor, and
[EXIT] button.
to select "OK," and then
display is shown.
"_*" (part number) is appended
"UTILITY," and then press
PAGE [ ] [ ]
knob.
"FACTORY RESET," and then
[EXIT] button.
to select "OK," and then
display is shown.
Convenient Functions (UTILITY Screen)

Formatting a USB Flash Drive

(FORMAT USB MEMORY)

Here's how to format a USB flash drive.
1 .
Connect a USB flash drive .
NOTE
5
If the USB flash drive contains important data, be aware that this operation
erases all data from the drive.
2 .
Press the [MENU] button .
3 .
Use the [1] knob to select
the [ENTER] button .
You can also make this selection by using the
buttons instead of the [1]
4 .
Use the [1] knob to select
and then press the [ENTER]
A confirmation message appears.
If you decide to cancel, press the
5 .
To execute, use the [2] knob
press the [ENTER] button .
When formatting is complete, the screen indicates
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the "Executing..."
"UTILITY," and then press
PAGE [ ] [ ]
knob.
"FORMAT USB MEMORY,"
button .
[EXIT] button.
to select "OK," and then
"Completed!"
display is shown.
49