Checking The Version Number; Users Data Save And Load - Roland Fantom-S88 Service Notes

Apr.2003
CHECKING THE VERSION
NUMBER
Procedure
1.
Turn on the power of the Fantom-S.
2.
Press the [MENU] button to access the Menu window.
3.
Use the [CURSOR] up/down buttons to select "System," and then press
the [ENTER] button.
4.
The System Setup screen will appear, and the LCD display will show as
follows.
fig.up1
5.
Press the [4] button "System Info".
6.
Use [1 ( )] [2 ( )] to select "Version Info." The Version Info screen will
appear, and the LCD display will show the program version number.
fig.up2
20
USERS DATA SAVE AND
LOAD
Backing Up User Data
(User Backup)
Here's how all user data in the user area can be saved on a memory card.
The following user data will be saved.
• Performances
• Patches
• Rhythm sets
• Rhythm Patterns
• Rhythm Groups
• Multisamples
• Songs
• Samples
• Pattern sets
• RPS sets
• Arpeggio styles
• Chord forms
• System settings
* In order to execute User Backup, the memory card must have approximately 16
MB or more free area.
1.
Insert a memory card into the slot.
2.
In the Utility screen, press [1 (User Backup)].
A message will ask you for confirmation.
3.
To execute the backup, press [8 (Exec)].
* To cancel, press [7 (Cancel)].
Restoring User Data that You
Backed Up (User Restore)
Here's how user data saved on a memory card by the User Backup operation
can be reloaded back into the user memory of the Fantom-s.
When you execute User Restore, the current contents of the user area will be
completely erased.
1.
Into the slot, insert the memory card on which user data has been saved.
2.
In the Utility screen, press [2 (User Restore)].
A message will ask you for confirmation.
3.
To proceed with the restoration, press [8 (Exec)].
* To cancel, press [7 (Cancel)].
4.
When the display indicates "Please Power Off," turn the power off, then
on again.