Making The Sound Control Settings (Sound Control); How To Make Settings; Selecting The Type Of Compressor (Sound Control Type) - Roland RD-700GX Owner's Manual

Making the Sound Control
Settings (Sound Control)
This is a stereo compressor (limiter) that is applied to the final
output.
With separate settings for the high-frequency range,
midrange, and low-frequency range, this reduces
inconsistencies in volume levels by compressing the sound
when the volume exceeds a preset volume level.

How to Make Settings

1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
fig.05-02g
2.
Press the Cursor [
"4.Sound Control."
3.
Press the [ENTER] button to display the Edit
screen.
fig.05-11g
The screen will not indicate "WRITE" if you've
selected "SETUP" as the Sound Control Mode
NOTE
setting for System in edit mode.
4.
Press the Cursor [
5.
Use the [DEC] [INC] buttons or the VALUE dial
to set the type of compressor.
6.
Press the Cursor [
screens, and press the Cursor [
to move the cursor to the parameter to be set.
With certain parameters, pressing the [F2 (L→M→H)]
button selects the low-frequency range, midrange, or
high-frequency range.
] [ ] buttons to select
] button to select "Type."
] [ ] buttons to switch
] [ ] buttons
Detailed Settings for Each Function ([EDIT] Button)
7.
Use the [DEC] [INC] buttons or the VALUE dial
to set the value.
If saving settings in System
8.
Press the [F1 (WRITE)] button.
The confirmation message appears.
9.
Press the [ENTER] button.
The settings are written to Sound Control Type "USER."
If saving settings in Setup
8.
Press the [SETUP WRITE] button.
Save the settings in a Setup as described on p. 67.
9.
When you have finished making the settings,
press the [EDIT] button, extinguishing its
indicator.
You are returned to the Tone screen.
Settings saved in the RD-700GX are not deleted
even when the power is turned off.
Selecting the Type of Compressor
(Sound Control Type)
When you change the this parameter, the Sound Control
parameters will be automatically adjusted to the optimal
values. You can make the settings easily by first setting the
Sound Control Type and then changing only the necessary
parameters.
Parameter Value
HARD COMP
SOFT COMP
Type
LOW BOOST
(Sound Control
MID BOOST
Type)
HI BOOST
USER
Description
Applies strong
compression.
Applies mild compression.
Boosts the low end.
Boosts the midrange.
Boosts the high end.
The saved settings are
written.
119