Installing The Ip Audio Conference Phone 2033 - Nortel 1110 Fundamentals

Nortel communication server 1000
Hide thumbs Also See for 1110:
Table of Contents

Advertisement

Parameter
Connect Server (IP address, port,
action and retry count—primary and
secondary)
User ID (Node ID, Node Password
and TN)

Installing the IP Audio Conference Phone 2033

To install the IP Audio Conference Phone 2033, use
"Installing the IP Audio Conference Phone 2033 for the first time using
manual configuration" (page
Conference Phone 2033 for the first time using DHCP" (page
Timing information
When you see the text Nortel, you have 1 second to respond by pressing the
three soft keys at the bottom of the display in sequence from left to right, one
at a time. If you miss the 1-second response time, the IP Audio Conference
Phone 2033 attempts to locate the connect server. You can begin the power-up
sequence again, or you can double-press the Services key to open the Local
diagnostic utilities to access the IP Phone settings. See
diagnostic utilities" (page
A tone sounds shortly before the IP Phone is ready to start the Nortel IP
Phone application. Once the application has loaded and started, the Nortel
logo and Starting DHCP appears at the bottom of the screen.
To edit network configuration, the following soft keys are available:
Procedure 26
Installing the IP Audio Conference Phone 2033 for the first time using manual
configuration
Step
1
Copyright © 2003–2007, Nortel Networks
.
Method of Acquisition
Manually entered or automatically retrieved through Full
DHCP.
Manually entered for first-time configuration. Retrieved
from local storage on subsequent power cycles.
OK—accept current settings and proceed to the next configuration
option. If all configuration options are presented, the configuration is
saved and the IP Phone reboots with the saved changes.
BkSpace—erase a configuration entry to change it
Clear—clear an entire configuration entry
Cancel—cancels network configuration. The IP Phone reboots without
saving changes.
Action
When the Nortel logo appears in the middle of the display,
immediately press the three soft keys at the bottom of the display in
sequence from left to right.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 151
151), or
Procedure 27 "Installing an IP Audio
ATTENTION
469).
Procedure 26
158).
Appendix "IP Phone

Advertisement

Table of Contents
loading

Table of Contents