Description - Nortel 1110 Fundamentals

100 Nortel IP Phone 2004
•
•
•
•
•
After an IP Phone is installed and configured, if power to the phone is
interrupted, you need not reenter the IP parameters, Node Number, TN,
or reacquisition of firmware.

Description

The IP Phone 2004 uses the customer IP data network to communicate
with the Communication Server 1000. The IP Phone 2004 translates voice
into data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server is used to provide information that
enables the IP Phone 2004 network connection, and Communication Server
1000 connection.
Figure 7 "IP Phone 2004" (page 100)
Figure 7
IP Phone 2004
Copyright © 2003–2007, Nortel Networks
.
Procedure 20 "Enabling Full Duplex mode" (page
Procedure 21 "Checking Ethernet Statistics" (page
Procedure 22 "Changing the TN of an existing IP Phone 2004" (page
132).
Procedure 23 "Replacing an IP Phone 2004" (page
Procedure 24 "Removing an IP Phone 2004 from service" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
130).
131).
133).
shows the IP Phone 2004.
133).