Description - Nortel 1110 Fundamentals

136 Nortel IP Audio Conference Phone 2033
•
•
•
•
•
•
•
After an IP Phone is installed and configured, if power to the phone is
interrupted, you need not reenter the IP parameters, Node Number, TN,
or reacquisition of firmware.

Description

The IP Audio Conference Phone 2033 uses the customer IP data network
to communicate with the Communication Server 1000. The IP Audio
Conference Phone 2033 translates voice into data packets for transport
using Internet Protocol. A Dynamic Host Configuration Protocol (DHCP)
server is used to provide information that enables the IP Audio Conference
Phone 2033 network connection, and Communication Server 1000
connection.
Figure 10 "IP Audio Conference Phone 2033" (page 137)
Audio Conference Phone 2033.
Copyright © 2003–2007, Nortel Networks
.
Procedure 26 "Installing the IP Audio Conference Phone 2033 for the
first time using manual configuration" (page 151)
Procedure 27 "Installing an IP Audio Conference Phone 2033 for the
first time using DHCP" (page 158)
Procedure 28 "Enable Full Duplex mode" (page 165)
Procedure 29 "Checking Ethernet Statistics" (page 166)
Procedure 30 "Changing the TN of an existing IP Audio Conference
Phone 2033" (page 166)
Procedure 31 "Replacing an IP Audio Conference Phone 2033" (page
167)
Procedure 32 "Removing an IP Audio Conference Phone 2033 from
service" (page 168)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
shows the IP