Reinstalling An Ip Audio Conference Phone 2033 - Nortel 2001 Installation And Operation Manual

Page 338 of 430

Reinstalling an IP Audio Conference Phone 2033

553-3001-368 Standard 7.00
Nortel IP Audio Conference Phone 2033
default gateway. In this scenario, all traffic from the victim's machine flows
through the malicious device.
To enable GARP Protection during configuration, refer to Procedure 48,
"Installing an IP Audio Conference Phone 2033 for the first time using
manual configuration" on
Conference Phone 2033 for the first time using DHCP" on
You can reinstall an existing previously configured IP Audio Conference
Phone 2033 on the same system. For example, the IP Audio Conference
Phone 2033 can be assigned to a new user (new TN) or to an existing user
who moved to a new subnet by changing the TN of the IP Audio Conference
Phone 2033.
Procedure 51
Changing the TN of an existing
IP Audio Conference Phone 2033
1 Repower the IP Audio Conference Phone 2033.
Note: During the reboot sequence of a previously configured the
IP Audio Conference Phone 2033 displays the existing node number for
approximately five seconds.
2 If node password is enabled and NULL, choose one of the following:
a. Disable password.
b. Set password as non-NULL.
3 Press OK when the node number displays.
If
node password is enabled and is
not NULL
node password is disabled
4 Enter password at the password screen, and press OK.
A TN screen displays.
August 2005
page 323 or Procedure 48, "Installing an IP Audio
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
page 331.