Nortel 1110 Fundamentals page 43

8
Startup sequence
When an IP Phone 2001 connects to the network, it must perform a startup
sequence. The elements of the startup sequence include:
•
•
•
•
See
IP parameters and how they are obtained.
Table 5
IP Phone 2001 IP parameters
Parameter
VLAN ID
IP Address
Net Mask
Default Gateway Address
Connect Server (IP address, port,
action and retry count—primary and
secondary)
User ID (Node ID, Node Password
and TN)
Copyright © 2003–2007, Nortel Networks
.
Use Procedure 2 "Installing the IP Phone 2001 for the first time using
manual configuration" (page 44)
first time using manual configuration, or use
an IP Phone 2001 for the first time using DHCP" (page 51)
the IP Phone 2001 for the first time using DHCP.
obtaining VLAN ID (if supported by the network infrastructure)
obtaining the IP parameters
connecting to the Call Server
obtaining a User ID
Table 5 "IP Phone 2001 IP parameters" (page 43)
Method of Acquisition
Manually entered or automatically obtained through
DHCP, and LLDP.
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through
Partial or Full DHCP.
Manually entered or automatically retrieved through Full
DHCP.
Manually entered for first-time configuration. Retrieved
from local storage on subsequent power cycles.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 43
to install the IP Phone 2001 for the
Procedure 3 "Installing
—End—
to install
for a summary of the