Nortel 1110 Fundamentals page 53

Copyright © 2003-2007, Nortel Networks
.
b. If you select Partial DHCP, then you must enter the following
parameters:
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry count
S1 PK
S2 IP
S2 Port
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 53
Description
The primary CS 1000 node IP address for
the IP Phone 2001.
This is a fixed value: 4100.
Choose one of the following:
• for TPS only, enter 1
• for TPS and Secure Media Controller,
enter 6 or 1
For more information about Secure Media
Controller, see Secure Multimedia Controller
Implementation Guide (NN43001-325).
You are not prompted for S1 PK if the S1
action is set to 1.
The number of times the IP Phone 2001
attempts to connect to the server. Enter 10.
To manually configure the PK, set the Action
Byte to 6. After you enter the PK, apply the
changes and then change the Action Byte
to 1, if required.
Default is ffffffffffffffff.
The Private key of the Secure Media
Controller to which the IP Phone connects.
If you use a Secure Media Controller, enter
a 16-digit hexadecimal number.
To enter ALPHA digits from A to F, enter
the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
The secondary CS 1000 node IP address
for the IP Phone 2001.
Same as S1.