Kir (Kyocera Image Refinement) - Kyocera FS FS-1920 Operation Manual

Pagination

KIR (Kyocera Image Refinement)

Status Page
Hardware Information
Page Information
Network Status
Interfaces
KIR Checking
KIR
Lines
This printer incorporates the KIR (Kyocera Image Refinement) smoothing
function. This function provides high print quality by providing software
enhancement of print resolution.
Q
Set the print density to 3 when setting the KIR mode. For details on print
density, see page 1-95.
Note
Look at the check line, the last line on a status page, to make the optimum
KIR mode setting.
FS-1920 Page Printer
STATUS PAGE
Firmware Version: Released:
Memory
Installed Options
Emulation
Error Log
Toner Gauge
100
0
Test pattern ON
With KIR Off
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to
page again. If you still get dark vertical stripes,
adjust the print density control to a lighter setting.
White vertical stripes
Set the KIR mode to On. Try printing the status
page again. If you still get white vertical stripes,
adjust the print density control to a darker setting.
1-52
With KIR On (default)
Off
. Try printing the status