Table of Contents
Advertisement
Status and Statistics
802.1X EAP
802.1X EAP
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
The 802.1x EAP page displays detailed information regarding the EAP (Extensible
Authentication Protocol) frames that sent or received. To configure the 802.1X feature, see
the
Properties
page.
To view the EAP Statistics and/or set the refresh rate:
Click Status and Statistics > 802.1x EAP.
Select the Interface that is polled for statistics.
Select the Refresh Rate (time period) that passes before the EAP statistics are refreshed.
The values are displayed for the selected interface.
•
EAPOL Frames Received—Valid EAPOL frames received on the port.
•
EAPOL Frames Transmitted—Valid EAPOL frames transmitted by the port.
•
EAPOL Start Frames Received—EAPOL Start frames received on the port.
•
EAPOL Logoff Frames Received—EAPOL Logoff frames received on the port.
•
EAP Response/ID Frames Received—EAP Resp/ID frames received on the port.
•
EAP Response Frames Received—EAP Response frames received by the port (other
than Resp/ID frames).
•
EAP Request/ID Frames Transmitted—EAP Req/ID frames transmitted by the port.
•
EAP Request Frames Transmitted—EAP Request frames transmitted by the port.
•
Invalid EAPOL Frames Received—Unrecognized EAPOL frames received on this
port.
•
EAP Length Error Frames Received—EAPOL frames with an invalid Packet Body
Length received on this port.
•
Last EAPOL Frame Version—Protocol version number attached to the most recently
received EAPOL frame.
•
Last EAPOL Frame Source—Source MAC address attached to the most recently
received EAPOL frame.
To clear statistics counters:
•
Click View All Interfaces Statistics to view the counters of all interfaces.
4
42
Hide quick links:
Advertisement
Table of Contents
