Show Vlan Port Config - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Example
Command History

show vlan port config

Command
Syntax Description
26-8
Single Instance:
switch# show vlan device info
Vlan device configurations
--------------------------
Vlan Status
Vlan Oper status
Gvrp status
Gvrp Oper status
Bridge Mode
Traffic Classes
Vlan Operational Learning Mode
Version number
Max Vlan id
Max supported vlans
Multiple Instance:
switch# show vlan device info
Switch default
Vlan device configurations
--------------------------
Vlan Status : Enabled
Vlan Oper status : Enabled
Gvrp status : Enabled
Gmrp status : Disabled
Gvrp Oper status : Enabled
Gmrp Oper status : Disabled
Mac-Vlan Status : Disabled
Protocol-Vlan Status : Enabled
Bridge Mode : Provider Edge
Bridge
Traffic Classes : Enabled
Vlan Operational Learning Mode : IVL
Version number : 1
Max Vlan id : 4094
Max supported vlans : 1024
Version History
1.00.001 This command was introduced
To display the VLAN configurations of ports.
show vlan port config [{port <interface-type> <interface-id>}]
port interface-type
interface-id
: Enabled
: Enabled
: Disabled
: Disabled
: Customer Bridge
: Enabled
: IVL
: 1
: 4095
: 256
Specify which port to show VLAN configurations.
Interface-type including Fa (Fast Ethernet) or Gi
(Gigabit Ethernet).
Interface-id is slot/port number.