Show Class-Map - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
User Guidelines
Example
Command History

show class-map

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History
36-2
The access control list rule must be created before associating.
switch(config-cmap)# match access-group mac-access-list 1
Version History
1.00.001 This command was introduced
To display the settings of class maps.
show class-map [<class-map-num(1-65535)>]
class-map-num
(1-65535)
Privileged EXEC Mode
System will show all the class map information when executing the command
without a given class map number.
switch# show class-map
DiffServ Configurations:
------------------------
Class map 1
--------------
Filter ID
Filter Type
DiffServ Configurations:
------------------------
Class map 2
--------------
Filter ID
Filter Type
Version History
1.00.001 This command was introduced
Specify which class map to display.
: 1
: MAC-FILTER
: 1
: MAC-FILTER