Static Vlan Configuration; Dynamic Vlan; Dynamic Vlan Global Configuration - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Acceptable Frame
Types
Ingress Filtering
In the left-hand Select column, check all of the ports modified and click Apply to submit the changes.

Static VLAN Configuration

This page is to set up the static VLAN configuration.
Parameter
VLAN ID
VLAN Name
Member Ports
Untagged Ports
Forbidden Ports
Click Apply to submit the changes and the Reset button will clear the information. Click Delete will remove an
existed VLAN.
Note

Dynamic VLAN

Dynamic VLAN Global Configuration

This page is to set the global dynamic VLAN configuration.
6-6
To configure the acceptable frame type of a port.
All: Accepts all kinds of frames.
Tagged: Accepts only tagged frames
UnTagged and Priority Tagged: Accepts only untagged frames and frames
with priority tag.
Default is All.
To enable/disable the filter of ingress packets not with the same VLAN tag as
the VLAN membership of the port. Default is Enabled.
Figure 34 – Layer2 Management > VLAN > Static VLANs
Description
Specify the VLAN ID to be created.
Specify the name of VLAN.
Specify the ports to apply the VLAN membership.
Specify the ports to be untagged interfaces.
Specify the ports to be forbidden interfaces.
There has to be at least one VLAN in the system.