Mtu; Show Interfaces - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Default Settings
Command Modes
User Guidelines
Example
Command History

mtu

Command
Syntax
Description
Default Settings
Command Modes
User Guidelines
Example
Command History

show interfaces

Command
44-2
shutdown
no shutdown
Interfaces had been created are active by default.
Interface Configuration Mode
The no form reactivates the interface.
switch(config-if)# shut down
Version History
1.00.001 This command was introduced.
To setup the Maximum Transmission Unit (MTU) frame size of the interface.
mtu <frame-size(90-1522)>
frame-size(90-1522)
1500
Interface Configuration Mode
Interface must be shutdown before configuring MTU size.
switch(config-if)# mtu 90
Version History
1.00.001 This command was introduced.
To display the status, configurations or statistics of the interface
show interfaces
[{ description | flowcontrol | capabilities | status }] |
port-channel <port-channel-id (1-65535)> }]
[{ [<interface-type> <interface-id>]