Ip Access-Group; Show Access-Lists - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

ip access-group

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

show access-lists

Command
Syntax Description
Command Modes
User Guidelines
Example
35-12
To apply an IP access control list from the port.
ip access-group <access-list-number (1-65535)>
no ip access-group [<access-list-number (1-65535)>]
access-list-number
(1-65535)
Interface Configuration Mode
Using no form to dissociate ACL from the port.
switch(config-if)# ip access-group 1001
Version History
1.00.001 This command was introduced
To display the details of configured access lists.
show access-lists
(1-65535)> ]
ip
mac
access-list-number
(1-65535)
Privileged EXEC Mode
System will display all access list information without a given IP or MAC access
list number.
switch# show access-lists mac 1
Extended MAC Access List 1
-----------------------------
EtherType
Vlan Id
Destination MAC Address
Source MAC Address
In Port List
Filter Action
Status
[[{ip | mac}]
To disply IP access control list.
To display MAC access control list.
Specify the ID of access control list.
: 0
: 0
: 00:00:00:00:00:00
: 00:00:00:00:00:00
: NIL
: Permit
: InActive
<access-list-number