Permit (Extended Ip Access List Configuration) - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

permit (Extended IP Access List Configuration)

Command
35-8
To configure a rule that packets matched will be processed.
permit { ip | ospf | pim | <protocol-type (1-255)>} { any | host
<src-ip-address> | <src-ip-address> <mask> }
<dest-ip-address> | <dest-ip-address> <mask> } [ {tos <value
(0-7)> | dscp <value (0-63)>} ]
permit {tcp |
<src-ip-address>
(1-65535)> <x8000 | xC000 | xE000 | xF000 | xF800 | xFC00 | xFE00
| xFF00 | xFF80 | xFFC0 | xFFE0 | xFFF0 | xFFF8 | xFFFC | xFFFE
| xFFFF>} {any | host <dest-ip-address> | <dest-ip-address>
<dest-ip-mask>} {anyport | <dest-port (1-65535)> <x8000 | xC000
| xE000 | xF000 | xF800 | xFC00 | xFE00 | xFF00 | xFF80 | xFFC0
| xFFE0 | xFFF0 | xFFF8 | xFFFC | xFFFE | xFFFF>} [ {tos <value
(0-7)> | dscp <value (0-63)>} ] [{ ack | ack-not }][{ rst |
rst-not }]
udp} {any |
<src-ip-mask>}
{ any | host
host <src-ip-address>
{anyport |
|
<src-port