Ports - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Syntax Description
Default Settings
Command Modes
Example
Command History

ports

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History
26-3
vlan-id(1-4094)
1
Interface Configuration Mode
switch(config-if)# switchport pvid 100
Version History
1.00.001 This command was introduced
To apply the VLAN membership to ports or port-channels.
ports ([<interface-type> <0/a-b,0/c,...>] [<interface-type>
<0/a-b,0/c,...>]
(<interface-type>
<0/a-b,0/c,...>] [port-channel <a,b,c-d>] [all])] [forbidden
<interface-type>
<0/a-b,0/c,...>] [port-channel <a,b,c-d>]] [name <vlan-name>]
interface-type
0/a-b,0/c,...
port-channel a,b,c-d
untagged
all
forbidden
name vlan-name
The default port membership is tagged.
Config-vlan Mode
The untagged port must be the subset of member port.
switch(config-vlan)# ports fa 0/1-5 untagged fa 0/5 forbidden
fa 0/7 name trendnet
Version History
1.00.001 This command was introduced
Specify the PVID of the port.
[port-channel
<0/a-b,0/c,...>
<0/a-b,0/c,...>
Specify the ports to apply the VLAN membership.
Interface-type including Fa (Fast Ethernet) or Gi
(Gigabit Ethernet).
Interface-id is slot/port number.
Specify the port-channels to apply the VLAN
membership.
Apply untagged membership to interfaces.
Apply untagged membership to all interfaces.
Apply forbidden membership to interfaces.
Specify the name of this VLAN.
<a,b,c-d>]) [untagged
[<interface-type>
[<interface-type>