24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Link Aggregation Command List
set port-channel
Command
Syntax Description
Default Settings
Command Modes
Example
Command History
lacp system-priority
Command
30-1
Link Aggregation Command
set port-channel
lacp system-priority
port-channel load-balance
channel-group
lacp port-priority
lacp timeout
lacp wait-time
shutdown port-channel
show etherchannel
show lacp
show interfaces etherchannel
To enable or disable port channel function of the Switch.
set port-channel { enable | disable }
Enables the port channel.
enable
Disables the port channel.
disable
Disable
Global Configuration Mode
switch(config)# set port-channel enable
Version
History
1.00.001
This command was introduced
To set the LACP priority of the Switch.
lacp system-priority <0-65535>
no lacp system-priority
Chapter 30