Chapter 44 Interface Command; Interface Command List; Interface; Shutdown - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

Interface Command List

interface

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

shutdown

44-1

interface

shutdown

mtu

show interfaces

show interface mtu

show interfaces counters
To create or enter a physical or logical network interface.
interface { vlanMgmt | Port-Channel <port-channel-id(1-65535)>
| <interface-type> <interface id> }
no interface {
(1-65535)> | <interface-type> <interface id> }
vlanMgmt
Port-Channel
port-channel-id
(1-65535)
interface-type
interface id
Global Configuration Mode
To create or entering a port channel, port-channel function must be enabled first.
switch(config)# interface fa 0/1
switch(config-if)#
Version History
1.00.001 This command was introduced.
Shutting down the network interface.
Interface Command
vlanMgmt | Port-Channel
To enter the management VLAN of the Switch.
To enter a port channel interface. If the channel ID specified
doesn't exist, system will create a new port channel.
To enter a physical port.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Chapter 44
<port-channel-id