Rmon Collection History; Rmon Collection Stats - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command Modes
User Guidelines
Example
Command History

rmon collection history

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

rmon collection stats

41-3
Global Configuration Mode
1. RMON function must be enabled and RMON event must be configured before
configuring alarms.
2. Using no form to delete events from RMON event table.
switch(config)# rmon event 1 description broadcast-too-high log
owner trendnet trap redalert
Version History
1.00.001 This command was introduced
To enable and setup the RMON collection history on a port.
rmon collection
<bucket-number (1-50)>] [interval <seconds (1-3600)>] [owner
<ownername (127)>]
no rmon collection history <index (1-65535)>
index (1-65535)
buckets
bucket-number (1-50)
interval seconds
(1-3600)
owner ownername (127)
Interface Configuration Mode
1. RMON function must be enabled and RMON event must be configured before
configuring alarms.
2. Using no form to disable the history collection..
switch(config-if)#
interval 10 owner trendnet
Version History
1.00.001 This command was introduced
To enable and setup the RMON statistics collection on a port.
history <index
Specify the index of history table.
The maximum number of RMON history collection.
The time interval for the history collection.
Specify the owner of the history group.
rmon collection
(1-65535)> [buckets
history 1 buckets 50