Deny (Mac Access List Configuration) - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Syntax Description
Command Modes
User Guidelines
Example
Command History

deny (MAC Access List Configuration)

Command
35-2
ip access-list { standard <access-list-number (1-1000)> |
extended <access-list-number (1001-65535)> }
no ip access-list { standard <access-list-number (1-1000)> |
extended <access-list-number (1001-65535)> }
standard
access-list-number
(1-1000)
extended
access-list-number
(1001-65535)
Global Configuration Mode
1. Using no form to delete the access control list.
2. The ID cannot be duplicated for all access control list.
switch(config)# ip access-list standard 200
switch(config-std-nacl)#
Version History
1.00.001 This command was introduced
To configure a rule that packets matched will be filtered.
deny { any | host <mac-address>}{ any | host <mac-address> }
[aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |
etype-6000 | etype-8042 | lat | lavc-sca | mop-console | mop-dump
| msdos | mumps | netbios | vines-echo | vines-ip | xns-id |
<protocol (0-65535)>] [ Vlan <vlan-id (1-4094)>]
Specify the ID to a standard IP access control list.
Specify the ID to a extended IP access control list.