Debug Garp; Show Garp Timer - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

debug garp

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

show garp timer

Command
27-4
To enable the debug mode of GARP function.
debug garp { global | [{protocol | gvrp | redundancy} [initshut]
[mgmt] [data] [ctpl] [dump] [os] [failall] [buffer] [all]]}
no debug garp { global | [{protocol | garp | redundancy}
[initshut] [mgmt] [data] [ctpl] [dump] [os] [failall] [buffer]
[all]]
global
protocol
Gvrp
Redundancy
Initshut
Mgmt
Data
Ctpl
dump
Os
Failall
Buffer
all
Disable
Privileged EXEC Mode
switch#
Version History
1.00.001 This command was introduced
To display the port timer settings.
show garp timer [{ port <interface-type> <interface-id>}]
Displays the global GARP debug messages for multiple
instances.
Displays the protocol related debug messages.
Displays the GVRP related debug messages.
Displays the redundancy related debug messages.
Displays the initial and shutdown debug messages.
Displays the management related debug messages.
Displays the data path debug messages.
Displays the control plane debug messages.
Displays the packet dump debug messages.
Displays the debug messages for all resources except
buffer.
Displays the all failure messages.
Displays the buffer debug messages.
Displays all debug messages.