Ip Igmp Snooping Send-Query; Ip Igmp Snooping Fast-Leave - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

ip igmp snooping send-query

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

ip igmp snooping fast-leave

32-6
received a IGMPv2 leave message.
ip igmp snooping retry-count <1 - 5>
no ip igmp snooping retry-count
Specify the maximum retries for group specific queries.
1 - 5
2
Global Configuration Mode
Using no form to reset the retry counter to default.
switch(config)# ip igmp snooping retry-count 5
Version History
1.00.001 This command was introduced
To configure if the Switch sends IGMP queries.
ip igmp snooping send-query { enable | disable }
Switch sends IGMP queries.
enable
Switch does not send IGMP queries.
disable
Enable
Global Configuration Mode
switch(config)# ip igmp snooping send-query disable
Version History
1.00.001 This command was introduced
Enable or disable the IGMP snooping fast leave function on a VLAN.