Rmon Alarms Configuration - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Interval
Owner
Status
Click Apply to submit the changes.

RMON Alarms Configuration

To set a RMON alarm to a MIB object.
Parameter
Index (1~65535)
Interval (1~2^31-1
secs)
Variable
Sample type
Rising Threshold
(0~2^31-1)
Falling Threshold
(0~2^31-1)
Rising Event Index
(1~65535)
Falling Event Index
(1~65535)
Owner
Click Add to create a new RMON alarm, Reset to clear the value.
Parameter
Select
Index
9-7
Specify the time interval for the history collection.
Specify the owner of the history entry.
Specify the status of this history entry. The options are:
Valid - The history entry is valid.
Under Creation -
Invalid - The history entry is invalid and will be deleted.
Figure 81 – RMON > Alarms
Description
Specify the index of the RMON alarm.
The time interval in seconds that alarm monitors the MIB variable.
The MIB OID to set alarm.
The type of the alarm sampling. The options are:
Absolute value - To test the MIB variable directly.
Delta value - To test the change between samples of a MIB variable.
The threshold value to trigger alarm when the number of sample exceeds.
The threshold value to reset alarm when the number of sample exceeds.
The number of event to trigger when rising threshold is exceeded.
The number of event to trigger when falling threshold is exceeded.
Specify the owner of the alarm entry.
Description
Select a RMON alarm entry to apply the configuration changes.
Specify the index of the RMON alarm.