Chapter 33 Static Mac Entries Command; Static Mac Entries Command List; Mac-Address-Table Aging-Time; Mac-Address-Table Static Multicast - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
Static MAC Entries Command

Static MAC Entries Command List

mac-address-table aging-time

Command
Syntax Description
Default Settings
Command Modes
Example
Command History

mac-address-table static multicast

33-1

mac-address-table aging-time

mac-address-table static multicast

mac-address-table static unicast

show mac-address-table

show mac-address-table aging-time

show mac-address-table count

show mac-address-table dynamic multicast

show mac-address-table dynamic unicast

show mac-address-table static multicast

show mac-address-table static unicast
To set the aging time of L2 Forwarding Database (FDB).
mac-address-table aging-time <10-1000000 seconds>
no mac-address-table aging-time
Specify the aging time if L2 FDB.
10-1000000
seconds
300
Global Configuration Mode
switch(config)# mac-address-table aging-time 100
Version History
1.00.001 This command was introduced
To create a static multicast entry in L2 FBD.
Chapter 33