Connecting The Power Cord; Once Connections Are Completed; Turning The Power; Turning The Power Off - Denon AVR-4310CI Owner's Manual

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<ON/STANDBY> <POWER>
[ MAIN]
QUICK SELECT
[POWER ON]
[POWER OFF]
[INPUT
SOURCE
SELECT]

Connecting the Power Cord

Wait until all connections have been completed before connecting the
BUTTON
power cord.
<BUTTON>
[BUTTON]
QUICK SELECT
NOTE
• Insert the AC plugs securely. Incomplete connections could cause
noise.
• Only use the AC outlets to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
Connection to the AC outlet
• These outlets supply power to external audio
equipment.
• Audio equipment with a total power
consumption of 120 W (1 A) can be
connected.
• The power supply turns on and off together
<ON/STANDBY>
with . When set to "ON",
power is supplied from the outlet. When set
to "STANDBY", no power is supplied.
Power cord
To household power
(included)
outlet
(AC 120 V, 60 Hz)
Once Connections are
Completed
Turning the Power On
1
<POWER>
Press .
The power indicator lights red and the power is set to the
standby mode.
2
Press [MAIN] to switch the main remote control unit
to "MAIN" mode (vpage 89 "Operating the Main
Remote Control Unit").
3
[POWER ON] <ON/STANDBY>
Press or
The power indicator fl ashes green and the power turns on.
[INPUT SOURCE SELECT]
Also press
b
in standby mode, the power turns on.
[INPUT SOURCE SELECT]
When has been pressed, the input
[INPUT SOURCE SELECT]
source set with the
QUICK SELECT
has been pressed, the input source stored in
the memory for the quick select function is set (vpage 82
"Saving Frequently Used Settings (Quick Select Function)").

Turning the Power Off

1
[MAIN]
Press to switch the main remote control unit
to "MAIN" mode (vpage 89 "Operating the Main
Remote Control Unit").
2
[POWER OFF] <ON/STANDBY>
Press or
The power is set to the standby mode.
3
Press <POWER> .
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
<POWER>
time or when traveling, either press
or unplug the power cord from the power outlet.
.
QUICK SELECT
or when
is set. If a
.
to turn off the power,
2