Operating the Connected Devices by Remote Control Unit
Operating the Main Remote
Control Unit
•
On the main remote control unit, the display switches according to
the device being operated and the mode.
•
In the "MAIN", "SAT TU", "DTU", "iPod" and "NET/USB"
modes, when the remote ID is set, the AVR-4310CI can be used
independently even in an environment containing multiple DENON
amplifiers. (vpage 93 "Setting the Remote ID")
Signal
transmission
indicator
[DEVICE
SELECTOR]
[
MAIN]
[QUICK
SELECT]
[POWER ON]
[POWER OFF]
[MASTER
VOLUME]
[MUTE]
[0 ~ 9]
[RC SETUP]
8
Operating AV Equipment
1
Press
[DEVICE SELECTOR]
operated.
The indicator for the component to be operated flashes.
: MAIN / ZONE2 / ZONE3 / ZONE4 z / MACRO
: Cannot be used.
: XM / SIRIUS
: HD Radio (Digital Tuner)
[
SAT/CBL]
: Satellite Receiver / Cable Tuner / IPTV / HDTV (Set Top
[ DVD/HDP]
Box)
: iPod
[
VCR/DVR]
[ TV]
: Network / USB
: Blu-ray Disc Player / HD DVD Player /
DVD Player (Recorder) / CD Player (Recorder)
Digital Video Recorder
:
: TV
z: The AVR-4310CI cannot be used in the ZONE4 mode.
The mode switches each time
b
GMAIN modeH
for the component to be
GMACRO modeH
2
Operate the component.
For details, refer to the component's operating instructions.
b
•
In ZONE2, ZONE3 and ZONE4 modes, you can switch the main zone
power on or off by pressing
•
[QUICK SELECT]
operated when the device selected is something other than
In this case, the zone you used last can be operated. Check using
the zone indicator.
[MAIN]
is pressed.
GZONE2 modeH
GZONE3 modeH
GZONE4 modeH
[POWER ON]
[POWER OFF]
or
.
[MUTE]
[MASTER VOLUME]
,
and
can also be
[MAIN]
.