Denon AVR-4310CI Owner's Manual page 64

Tuning in Radio Stations – HD Radio
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT> ENTER
<TUNING PRESET>
o <STATUS>
[ DTU]
[SEARCH]
o
[CHANNEL]

Listening to Preset Stations
1
[A ~ G]
Press
BUTTON
2
<BUTTON>
[CHANNEL]
Press
[BUTTON]
station.
• You can also operate via the main unit. In this case, perform the
following operations.
<TUNING PRESET>
Press
the preset radio station.
• If an audio program from HD2 to HD8 has been interrupted or if
a program is called out using the preset buttons after it has been
interrupted, HD1 is automatically selected after about 20 seconds.
Default settings
n
A1 ~ A8 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /100.1 MHz
B1 ~ B8 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C8 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
[A ~ G]
ENTER
[0 ~ 9]
to select the memory block (A to G).
[1 ~ 8]
or to select the desired preset
<SOURCE SELECT>
, then turn to select
Tuner presets
Direct Frequency Tuning
You can enter the receiving frequency directly to tune in.
1
[SEARCH]
Press .
2
[0 ~ 9]
Input frequencies by means of
o
b If is pressed, the immediately preceding input is cancelled.
3
When setting is completed, press
The preset frequency is tuned in.
Check the HD Radio Reception Information
Press <STATUS> while an HD Radio broadcast is being
received.
The current reception information is shown on the display.
q Normal
↓
w Frequency / Signal strength
↓
e Long station name / Program and Program type
↓
r Title name / Artist name
↓
t Album name / Genre name
NOTE
If the station signal weakens while receiving a digital broadcast (while
" " and text is displayed), the mode automatically switches to the
analog reception mode (the reception frequency is displayed).
Because of this, the " " indicator and text may fl icker if the station
signal level is weak and unstable.
.
ENTER
.