Denon AVR-4310CI Owner's Manual page 41

Making the Audio Settings (Audio Setup)
Make settings for audio playback.
Setting items
EXT. IN Setup Surround Speaker : Set the surround speakers to use during playback in
Setup playback method for EXT. IN mode.
analog signals inputted from • A : Use surround speakers A.
external input connectors • B : Use surround speakers B.
(EXT. IN). • A+B : Use surround speakers A and B.
Can be set when the "Speaker Confi guration" – "Surround A" or
"Surround B" setting (vpage 35) is "Large" or "Small".
Subwoofer Level : Set playback level of subwoofer signal input from the
external input connector (EXT. IN).
• +15dB : This is the recommended level.
• +10dB / +5dB / 0dB : Select the level according to the player being
used.
2ch Direct/Stereo Setting : Select the method for setting the speakers used in the 2-channel
Make speaker settings for 2- direct and stereo playback modes.
channel mode playback. • Basic : The settings at "Speaker Setup" (vpage 34) are applied.
• Custom : Make separate settings for 2-channel.
Front : Set the front speaker size.
• Large : Use of a large speaker that can adequately playback low
frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
If "Speaker Confi guration" – "Subwoofer" (vpage 34) is set to
"No", the setting is automatically set to "Large".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
If "Speaker Confi guration" – "Subwoofer" (vpage 34) is set to
"No", the setting is automatically set to "No". If the "Front" setting is
"Small", the setting is automatically "Yes".
Main remote control
operation buttons
Default settings are underlined.
Setting contents
:Displaying the menu
Cancel the menu
Setting items
2ch Direct/Stereo SW Mode : Select low range signal to be reproduced by subwoofer.
(Continued) • LFE : When the "2ch Direct/Stereo" – "Front" setting is set to "Large",
the LFE signal alone is output from the subwoofer. Also, when the "2ch
Direct/Stereo" – "Front" setting is set to "Small", the front channel low
range signal is added to the LFE signal output from the subwoofer.
• LFE+Main : The front channel low range signal is added to the LFE signal
output from the subwoofer.
This can be set when "2ch Direct/Stereo" – "Subwoofer" is set to
"Yes".
Crossover : Outputs at below set frequency, each speaker's bass signal
output from the subwoofer.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz
• This can be set when "2ch Direct/Stereo" – "Subwoofer" is set to
"Yes".
• If the "2ch Direct/Stereo" – "Front" setting is "Large" and the "SW
Mode" setting is "LFE", "Full Band" is displayed and the setting cannot
be made.
Distance FL / Distance FR : Select the speaker.
• 0.0ft ~ 60.0ft (12.0ft) / 0.00m ~ 18.00m (3.60m) : Set the distance to
the speaker.
• Level FL / Level FR : Select the speaker.
–12.0dB ~ +12.0dB (0dB) : Adjust the level of each channel.
Set so that the difference between the front left speaker and front
right speaker distances is 6.0 m (20.0 ft) or less.
Level FL / Level FR : Select the speaker.
• –12.0dB ~ +12.0dB (0dB) : Adjust the level of each channel.
Auto Surround Mode ON : Memorize settings. Automatically play with the last used surround
Make setting for memorizing mode.
surround mode setting for OFF : Do not memorize settings. Surround mode does not change
each input signal type. according to input signal
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM, DSD,
• When playing in the PURE DIRECT, the surround mode does not change
even if the input signal is changed.
:Moves the cursor
:Confi rm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents
etc.)
:Return to previous menu
See overleaf
8