Punch Through Function; Setting The Time The Backlight Stays Lit; Adjusting The Backlight's Brightness - Denon AVR-4310CI Owner's Manual

Operating the Main Remote Control Unit
Signal
transmission
indicator
[DEVICE
SELECTOR]
[ MAIN]
[8], [1],
[9], [6],
[3], [7], [2]
[CHANNEL +, –]
[0 ~ 9]
[RC SETUP]
[MACRO]

Calling out
1
[MAIN]
Press , to select "MACRO".
[ SAT/CBL]
2
[MACRO]
Press
[ DVD/HDP]
registered.
[ VCR/DVR]
The registered signals are transmitted in the registered
[ TV]
sequence.

Punch Through Function

DVD/HDP (including BD and CD) or DVR/VCR mode buttons can be
stored at unused TV or SAT/CBL mode buttons.
For example, when DVD mode buttons are assigned to the TV mode,
the DVD mode operations can be performed while in the TV mode.
1
Press and hold in
The signal transmission indicator flashes twice.
2
Press [9] , [8] and
The signal transmission indicator flashes twice and the punch
through setting mode is set.
3
[DEVICE SELECTOR]
Press
[DVD/HDP]
punch through (
4
Press the button you want to punch through (
[2] [6] [7]
, ,
Each time the button is pressed, the signal transmission
indicator flashes once.
5
Press [DEVICE SELECTOR]
punch through (
6
Press and hold in
The signal transmission indicator flashes twice and the setting
is completed.
1 3
( ~ ) at which the signals were
[RC SETUP]
for at least 3 seconds.
[8] , in that order.
for the device you want to
[VCR/DVR]
or ).
[1] ,
[8] [9] [3]
, , or ).
for the device you want to
[TV] or [SAT/CBL] ).
[RC SETUP]
for at least 3 seconds.

Setting the Time the Backlight Stays Lit

1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [7] and [3] , in that order.
The signal transmission indicator flashes twice and the backlight
on time setting mode is set.
3
Set the light on time.
The signal transmission indicator flashes twice.
[1]
[Settable times] : : 5 sec.
[2]
: 10 sec. (Default)
[3]
: 15 sec.
[4]
: 20 sec.
[5]
: 25 sec.

Adjusting the Backlight's Brightness

The display's brightness can be adjusted in 5 steps.
(Default: Step 5)
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [CHANNEL +] or [CHANNEL –]
The display gets one step brighter when
pressed.
The display gets one step darker when
pressed.
3
[RC SETUP]
Press to complete the setting.
.
[CHANNEL +]
is
[CHANNEL –]
is