Connecting The Power Cord; Once Connections Are Completed - Denon AVR-1908 Owner's Manual

ENGLISH
To household
power outlet
(AC 120
V.
60 Hz)
3~'
• These outlets
devices.
• The power supplied from these outlets turns on
and off together with the set's power switch.
• Audio equipment with a total power consumption
of 120 W (1 A) can be connected.
Connecting the Power Cord
Once Connections are Completed
Wait until all connections have been completed before connecting the power cord.
-N,n•
• Insert the AC plugs securely. Incomplete connections could cause noise.
• Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or
anything other than audio equipment.
AUX
Input
OUT
Output
Infrared
I±l I±l
Infrared
retransmitter
I:
~I
Eill
sensor
G G
ZONE2 out Connections
-AUDlO-
Pre-main amplifier
(ZONE2)
If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to playa
different program source in ZONE2 at the same time (Etr'page 52 - 55).
s:
c:
2:
N
o
:::l
co
- - '
; I
~.
!
~
I
;:l.
•
~ !
"C
!
-:;;J
.. !
< ,
CT '
III
n
,...
-Min•
• For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced .
• For instructions on installing and operating separately sold devices, refer to the respective devices'
operating instructions.
• To conduct multi-zone playback, see "Amp Assign / Multi-zone Connections and Operations"
(~page
52
- 55).
17