Denon AVR-4310CI Owner's Manual page 44

Making Detailed Settings (Manual Setup)
Setting items
Other Party Start Level : Make settings for volume level when the Party Mode
(Continued) is started.
• Last : The same volume as set before the party mode was started.
• – – – (0) : Always use the muting on condition when the Party Mode is
started.
• –80dB ~ 18dB (1 ~ 99) : Start party mode with your preferred volume.
• This can be set when "Party Mode Function" is set to "ON".
• This is displayed from 0 to 99 when "Volume Display" (vpage 42) is
set to "Absolute".
• You can set to the upper limit set with "Volume Limit" (vpage 42) .
Network Status : Displays up to a maximum of 10 DENON products
connected on the same network.
• Friendly Name / Model Name / Power ON/Standby / Select Source /
Volume Level / Party Mode status
"Network Status" is only displayed for DENON products supporting
the Network Status function.
Update Notifi cation : Displays a notifi cation message on the AVR-
4310CI's GUI screen when the latest fi rmware is released with "Firmware
Update". The notifi cation message is displayed for about 20 seconds
when the power is turned on. Connect to broadband Internet (vpage
23) when using this function.
• ON : Display update message.
• OFF : Do not display upgrade message.
• When you press
"Check for Update" screen is displayed. (Refer to page 44 for more
information on "Firmware Update")
RETURN
• Press
Upgrade Notifi cation : Display a notifi cation message on the AVR-
4310CI's GUI screen when downloadable fi rmware is released with "Add
New Feature". The notifi cation message is displayed for about 20 seconds
when the power is turned on. Connect to broadband Internet (vpage 23)
when using this function.
• ON : Display update message.
• OFF : Do not display upgrade message.
• When you press
"Add New Feature" screen is displayed. (Refer to page 45 for more
information on "Add New Feature")
RETURN
• Press

Main remote control
operation buttons
Setting contents
ENTER
during display of the notifi cation message, the
to erase the notifi cation message.
ENTER
during display of the notifi cation message, the
to erase the notifi cation message.
:Displaying the menu
Cancel the menu
Setting items
Rhapsody Account Username / Password
The types of characters that can be input are as shown below.
Set or change Username
and Password (vpage 68
GLower case charactersH abcdefghijklmnopqrstuvwxyz
"Listening to Rhapsody").
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # " $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜ (Space)
GNumbersH 0123456789
• You can change the character type when you press
during character input.
• The password may not contain underscores ( _ ).
Napster Account
Username / Password
The types of characters that can be input are as shown below.
Set or change Username
and Password (vpage 66
GLower case charactersH abcdefghijklmnopqrstuvwxyz
"Listening to Napster").
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # " $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜ (Space)
GNumbersH 0123456789
• You can change the character type when you press
during character input.
• The password may not contain underscores ( _ ).
Network Information Friendly Name / DHCP= ON/OFF / IP Address / MAC Address
Display network information.
Making the Multi-zone Settings (Zone Setup)
Set the audio to playback with multi-zone (ZONE2, ZONE3).
Setting items
Bass –10dB ~ +10dB (0dB)
Adjust low frequency range
(bass).
Treble –10dB ~ +10dB (0dB)
Adjust high frequency range
(treble).
HPF OFF : The low range is not attenuated.
Make settings for cutting ON : The low range is attenuated.
the low range to reduce
distortion in the bass.
–12dB ~ +12dB (0dB)
Lch Level
Adjust the left channel
The "Lch Level" can be set when "Channel" (vpage 42) is set to
output level.
"Stereo".
:Moves the cursor
:Confi rm the setting
(Up/Down/Left/Right)
Setting contents
[SEARCH] MENU
or
[SEARCH] MENU
or
Default settings are underlined.
Setting contents
See overleaf
:Return to previous menu