Antenna Terminals; Connecting The Power Cord; Once Connections Are Completed - Denon AVR-1609 Owner's Manual

ENGLISH
o
AM loop antenna assembly
I
,.tl;~;.;¥d,;~n~A·~ th.AC:pu~.;r
",,,;X
• These outlets supply power to external audio
equipment.
• The power supplied from these outlets turns on and
off together with the set's power switch.
• Audio equipment with a total power consumption
of 120W (1 A) can be connected.
Power cord To household
~~!-"';''':':''':':''':':;';';;'-~:::1ii!j5l'i.III=
bJ
power outlet
lAC 120 V, 60 Hz)
Connecting the Power Cord
Wait until all connections have been completed before connecting the power cord.
t~[·n·
• Insert the AC plugs securely. Incomplete connections could cause noise.
• Only use the AC outlets to plug in audio equipment. Do not use them as power supplies for hairdryers or
anything other than audio equipment.
b. With the antenna attached
J:~+t
Installation hole Mount on wall, etc.
Bend in the reverse direction.
Connect to the AM
@
antenna terminals.
® ~
[jJ)
~
ri\
a. With the antenna on top of
\!I
any stable surface.
®}[ID
Remove the vinyl tie and take
out the connection line.
~+j;)
Mount
tN.n.
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.
Once Connections are Completed
Extension jack for future use.
(Connect devices corresponding
with room to room function to
this jack.)
Infrared
sensor
r;;~=;ln~p;ut~I>l!.....!I>l~Output
Infrared
~.
c::::J
I
EllJ
retransmitler
~·~~~~thEl,BlEI
Connecting a Room-to-Room Remote Control Unit
16