Denon AVR-4310CI Owner's Manual page 51

Setting items
Upon purchase, the settings of the different input sources are as shown
b
Digital DIGITAL
below.
(Continued)
Input
source
Default
setting
Input
source
Default
setting
When control dock for iPod is used as the input source, assignment of
the digital input terminal is disabled, even if it is assigned.
Component COMP
The DVD HDP
Set this to change the
are assigned to the component video input terminals as shown below.
component video input
1-RCA (Component video 1) / 2-RCA (Component video 2) / 3-RCA
terminals assigned to the
(Component video 3)
input sources.
None : Do not assign a component video input terminal to the selected
input source.
Upon purchase, the settings of the different input sources are as shown
b
below.
Input
source
Default
setting
• An input source to which a component video input terminal cannot be
assigned is displayed as "– – –".
• When control dock for iPod is used as the input source, assignment of
the component video input terminal is disabled, even if it is assigned.
Main remote control
operation buttons
Setting contents
CD DVD HDP TV SAT/CBL
COAX COAX COAX
None OPT 1
3 1 2
DVR V.AUX SIRIUS
OPT 2 OPT 3 None
TV SAT/CBL VCR DVR V.AUX input sources
SAT/
DVD HDP TV VCR DVR
CBL
1-RCA 2-RCA 3-RCA
None None None
:Displaying the menu
Cancel the menu
Setting items
The control dock for iPod can be assigned to the
iPod
iPod dock
Assign the control dock for
iPod input.
Assign : Assign the control dock for iPod to the selected input source.
VCR
None : Do not assign the control dock for iPod to the selected input
source.
None
•
•
•
Default Yes : Reset to the defaults.
Reset all settings to factory No : Do not reset to the defaults.
default.
If you select "Default" and press
to the default?" is displayed. Select "Yes" or "No", and then press
ENTER
Making the Video Settings (Video)
Setting items
V.AUX
SOURCE : Play the picture and sound of the input source.
Video Select
DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
Change video input to your
None
source to view. This can be set for individual input sources.
preferred input source.
Set by either pressing
SELECT]
•
•
•
•
•
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making the Input Settings (Source Select)
Setting contents
TV SAT/CBL VCR DVR V.AUX input sources.
By default on first use, it is assigned to "VCR (iPod)".
An input source to which control dock for iPod cannot be assigned is
displayed as "– – –".
If control dock for iPod is not connected to the AVR-4310CI, assignment
of the "iPod dock" is disabled, and you can use it as a standard input
source.
ENTER
the message "Return all settings
.
Default settings are underlined.
Setting contents
<VIDEO SELECT>
on the main unit or
on the main remote control.
When operating from the main remote control unit
[VIDEO SELECT]
Press repeatedly until the picture you want to see is
displayed.
[VIDEO SELECT]
To cancel, press , and select "SOURCE"
When operating from the main unit
<VIDEO SELECT>
After pressing on the main unit, turn the
SELECT>
on the main unit until the picture you want to see is displayed.
<VIDEO SELECT>
To cancel, press , then turn
select "SOURCE".
NOTE
It is not possible to select HDMI input signals.
The video select function does not work with HDMI signals.
Input sources for which "Delete" is selected at "Source Delete"
(vpage 42) cannot be selected.
:Return to previous menu
CD DVD HDP
[VIDEO
<SOURCE
<SOURCE SELECT>
and
See overleaf
8