Denon AVR-4310CI Owner's Manual page 45

Setting items
Rch Level –12dB ~ +12dB (0dB)
Adjust the right channel
The "Rch Level" can be set when "Channel" (vpage 42) is set to
output level.
"Stereo".
Channel Stereo : Select stereo output.
Set the signal output from Mono : Select mono output.
multi-zone.
When "Amp Assign" (vpage 34) is set to "ZONE (MONO)", the
"Channel" setting is automatically set to "Mono".
Volume Display Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Set how volume is Absolute : Display in the range 0 (Min) ~ 99.
displayed.
• The "Volume Display" setting is applied also to the "Volume Level",
"Volume Limit" and "Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Level Variable : Volume adjustment enabled by main unit and remote
Set the volume output level. controller.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amp.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amp.
When "Amp Assign" (vpage 34) is set to "ZONE2", "ZONE3" or
"ZONE (MONO)", the "Volume Level" setting is automatically set to
"Variable".
Volume Limit OFF : Do not set a maximum volume.
Make a setting for maximum –20dB (61) / –10dB (71) / 0dB (81)
volume.
Can be set when the multi-zone "Volume Level" setting (vpage 42)
is "Variable".
Power On Level Last : Use the memorized setting from the last session.
Defi ne the volume setting – – – (0) : Always use the muting on condition when power is turned on.
that is active when the –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
power is turned on.
Can be set when the multi-zone "Volume Level" setting (vpage 42)
is "Variable".
Mute Level Full : The sound is muted entirely.
Set the amount of attenuation –40dB : The sound is attenuated by 40 dB down.
when muting is on. –20dB : The sound is attenuated by 20 dB down.
Main remote control
operation buttons
Setting contents
:Displaying the menu
Cancel the menu
Making Other Settings (Option Setup)
OPTION
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE volume • Relative : Display ---dB (Min), in the range –80 dB ~ 18 dB.
setting. • Absolute : Display in the range 0 (Min) ~ 99.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Defi ne the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/
Remove input sources USB / XM / SIRIUS / HD Radio : Select input source that is not used.
that are not used from the • ON : Use this source.
display. • Delete : Do not use this source.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SELECT
GUI Screensaver : Make screensaver settings.
Make GUI related settings. • ON : The screen saver is activated during GUI menu display or NET/
USB / iPod / XM / SIRIUS / HD Radio screen display if no operation is
performed approximately for a continuous 3-minute period. When you
press
that screen saver started is displayed.
• OFF : Screen saver is not activated.
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
• Picture : Set the background to a picture (DENON logo).
• Black : Set the background to black.
• Gray : Set the background to gray.
• Blue : Set the background to blue.
:Moves the cursor
:Confi rm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Default settings are underlined.
Setting contents
.
uio p , the screen saver is cancelled and the screen before
:Return to previous menu
SOURCE
See overleaf
2