Playback - Denon AVR-4310CI Owner's Manual

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<ZONE2/3/ REC SELECT> <MASTER VOLUME>
<ON/STANDBY>
<ZONE2 ON/OFF> <ZONE3 ON/OFF>
[ MAIN]
QUICK
SELECT
[ZONE ON]
[SLEEP]
[ZONE OFF]
[MENU]
uio p
[VOLUME]
[SOURCE
SELECT]
[MUTE]
[INPUT
SOURCE
SELECT]
8

Playback

The operating procedure is the same for "q Zone Playback by Speaker
BUTTON
Output" and "w Zone Playback by Audio Output (PRE OUT)".
<BUTTON>
1
Turn on the AVR-4310CI's power.
[BUTTON]
(vpage 24 "Turning the Power On")
2
Turn on the zone power.
<ZONE2 ON/OFF>
P ress
zone to be operated.
When the power turns on, the "
on the display.
Operation on the remote control unit
[MAIN]
P ress to display the mode for the zone to be
operated, the press
When the power turns on, the "
QUICK SELECT
on the display.
[SOURCE SELECT]
Also press
b
turns on.
When using ZONE2 or ZONE3, it is possible to turn the power for
b
the MAIN ZONE only on or off by pressing
[MAIN ZONE OFF]
3
Select the input source.
QUICK
SELECT
<ZONE2/3/ REC SELECT>
[ZONE ON] P ress
q
be adjusted.
[ZONE OFF]
<SOURCE SELECT>
T urn
w
[SLEEP]
Operation on the remote control unit
[MENU]
I n the zone mode you want to operate, press
uio p
SELECT]
.
[SOURCE
SELECT]
The same input source as in the main zone can be selected easily
b
[M.ZONE CALL]
by pressing the
[VOLUME]
[MUTE]
[INPUT
SOURCE
SELECT]
Operation on the main unit
<ZONE3 ON/OFF>
or for the
" or " " indicator lights
[ON]
.
" or " " indicator lights
when in standby mode, the power
[MAIN ZONE ON]
.
Operation on the main unit
and select the zone to
to choose the input source.
[SOURCE
on the sub remote control unit.
4
Adjust the item below.
Adjust the Volume
n
Operation on the main unit
<ZONE2/3/ REC SELECT>
P ress
q
to be adjusted.
<VOLUME>
T urn to adjust.
w
Operation on the remote control unit
I n the zone mode whose volume you want to adjust,
[VOLUME]
press .
G Adjustable rangeH – – – –80dB ~ –40dB ~ 18dB
(When the "Volume Display" setting is "Relative")
GAdjustable rangeH 0 ~ 41 ~ 99
(When the "Volume Display" setting is "Absolute")
b Upon purchase, "Volume Limit" is set to "-10dB (71)".
n Turning off the Sound Temporarily (MUTE)
I n the zone mode for which you want to mute the
[MUTE]
sound, press .
The sound is reduced to the level set at menu "Mute Level"
(vpage 42).
or
To cancel, either adjust the volume or press
b
The setting is canceled when the zone's power is turned off.
b
and select the zone
[MUTE]
again.